Structural cracking, horizontal cracking of bed joints, bowing brickwork, and cracked lintels are all signs that a building is undergoing movement of some description. Causes can include wall tie failures, lintel failures and even natural causes such as tree roots affecting the foundation. Correctly diagnosing the exact cause is essential for suitable remedial work to be carried out.

- Helibeam System
- Crack Stitching
- Cavity Wall Ties
- Bulging Walls

Helibeam System
Preservation Treatments is an approved installer of the Helibeam System. The Helibeam System uses pairs of long HeliBars bonded into mortar to form deep masonry beams that reinforce and stabilise existing masonry while redistributing the structural loads.
It provides a rapid, cost-effective means of restoring structural integrity to buildings and structures where the masonry has failed and lost its load bearing capabilities. In combination with other Helifix ties and fixings it provides a comprehensive, reliable and economic system of repair and stabilisation for many commonly occurring structural faults.
Crack Stitching
Helifix Crack Stitching repairs and stabilises cracked masonry using stainless steel HeliBars bonded into cut slots with HeliBond grout for a quick, simple, effective and permanent solution. Cracked masonry is best stabilised by bonding HeliBar stainless steel bars into suitable bed joints or cut slots. Tensile loads are redistributed along the masonry to minimise further developments of the crack which may occur with simple injection methods.
Cavity Wall Ties
Preservation Treatments offer a versatile and rapidly installed mechanical pinning and remedial tying system that requires no resin, grout or mechanical expansion. Other types of tie are available for specialist applications. For securing delicate terracotta fixings, securing loose render and for securing a soft outer leaf material to a hard inner leaf.
BowTie is a long stainless steel tie used to stabilise bulging walls, without any external plates, by securing them into the ends of internal floor joists. BowTie HD is a heavy duty 12mm diameter threaded bar with self-cutting end used to restrain bowing building walls by securing them to internal parallel floor joists or roof beams.